""Free Shipping on USA"" We do not provide any authorization invoice for amazon Resale.
The Kenmore 9130 Refrigerator Water Filter is a replacement water filter built for select Kenmore bottom-freezer refrigerators using the 9130 filter code. NSF 42 certified to reduce chlorine taste and odor and Class III particulates including rust, dirt, sand, and sediment in the 5 to 15 micron size range, it delivers clean, fresh-tasting water and ice for up to 6 months after installation. It also replaces earlier part numbers 46-1173152-3 and 60199-0006802-00, covering a range of compatible models across production years. Check the part number on the existing filter before ordering to confirm the 9130 is the correct replacement for the specific unit. Specification Material: Activated carbon block Filter Life: Up to 6 months Filter Capacity: Up to 200 gallons External Testing Certification: NSF/ANSI Standard 42, NSF/ANSI 372 Lead-Free compliance Contaminants Reduced: Chlorine taste and odor, Class III particulates, rust, dirt, sand, sediment 5 to 15 microns Brand: Kenmore Part Number: 9130 Also Known As: 46-9130, 469130, 46130, 04609130000P, 60199-0006802-00, 60199-0006803-00, 3019986700 Replaces Earlier Part Numbers: 46-1173152-3, 60199-0006802-00 Flow Rate: 0.5 GPM Filter Location: Upper right corner inside the refrigerator compartment Installation Type: Quarter-turn twist-in, tool-free Batteries Required: No Key Features NSF 42 and NSF 372 Certified: Independently tested and certified against NSF/ANSI Standard 42 for chlorine taste, odor, and Class III particulate reduction, and NSF/ANSI 372 for lead-free material compliance, confirming the filter construction itself is safe for household use. Class III Particulate Reduction: Captures rust, dirt, sand, and sediment in the 5 to 15 micron size range, addressing the most common particulate contaminants in municipal and well water supplies. Wide Cross-Brand Compatibility: Fits select Kenmore bottom-freezer refrigerators and is cross-compatible with Daewoo, Hisense, Smeg, LG, Electrolux, Miele, and Westinghouse refrigerators using the DW2042FR-09 or equivalent filter code -- one of the broader compatibility ranges across standard refrigerator filter codes. Replaces Multiple Earlier Part Numbers: Directly replaces 46-1173152-3 and 60199-0006802-00, covering Kenmore models across different production years without requiring a separate listing for each code. Quarter-Turn Twist-In Installation: Rotate the old filter counterclockwise one quarter turn and pull it out. Insert the new filter and rotate clockwise one quarter turn to lock. No tools required. Press and hold the filter indicator button for 3 seconds to reset the change light after installation. 6 Month or 200 Gallon Replacement Cycle: Replace every 6 months or when water flow slows noticeably, whichever comes first. Refrigerators without an indicator light should follow the 6 month schedule as the replacement benchmark. Replace the Kenmore 9130 refrigerator water filter every 6 months for cleaner, fresher tasting water and ice from your refrigerator dispenser.
$49.99 - $140.00
The Kenmore 9990 Refrigerator Water Filter is a replacement water filter built for select Kenmore side-by-side, bottom-freezer, and top-freezer refrigerators using the 9990 filter code. NSF 42 and 53 certified to reduce lead, cysts, chlorine taste and odor, and common contaminants, it delivers clean, fresh-tasting water and ice for up to 6 months after installation. Cross-compatible with LG refrigerators using the LT600P filter code, the 9990 covers a wider range of compatible units than most standard Kenmore filter codes. Check the part number on the existing filter before ordering to confirm the 9990 is the correct replacement for the specific unit. Specification Material: Activated carbon block Product Dimensions: 12.45 x 2.5 x 2.5 inches Filter Life: Up to 6 months Filter Capacity: Up to 200 to 300 gallons External Testing Certification: NSF/ANSI 42 and 53 Contaminants Reduced: Lead, cysts, chlorine taste and odor, sediment, rust, particulates Brand: Kenmore Part Number: 9990 Also Known As: 46-9990, 469990, 46-9990 Equivalent Part Numbers: CLS30320001, 5231JA2006E, 5231JA2005A, LT600P, 5231JA2006A, 5231JA2006F, 5231JA2005E, 5231JA2006B, 1266885, 1268489, AP4457353, EAP2441842, PS2441842 Color: White with blue cap Flow Rate: 0.5 GPM Operating Temperature: 33 to 100 degrees Fahrenheit Working Pressure: 30 to 120 PSI Installation Type: Slide-and-twist, tool-free Flush Requirement: 2.5 gallons before first use Batteries Required: No Key Features NSF 42 and 53 Certified: Independently tested to reduce lead, cysts, chlorine taste and odor, and sediment -- covering both aesthetic and health-related contaminant categories. LG LT600P Cross-Compatibility: Functionally equivalent to the LG LT600P filter, fitting compatible LG-made Kenmore models as well as standard Kenmore side-by-side, bottom-freezer, and top-freezer refrigerators. Slide-and-Twist Installation: Unique installation design specific to the 9990 housing -- slide the filter in and twist clockwise to lock. Not interchangeable with push-in or push-button eject Kenmore filter housings. White with Blue Cap Design: The distinctive blue cap makes the 9990 easy to identify at replacement time and confirms correct filter orientation during installation. 2.5 Gallon Flush Requirement: After installation, flush 2.5 gallons through the dispenser before drinking to clear air pockets and carbon fines from the new filter. 6 Month or 200 to 300 Gallon Service Life: Replace every 6 months or when water flow slows noticeably, whichever comes first. Replace the Kenmore 9990 refrigerator water filter every 6 months for consistently clean, fresh-tasting water and ice from your refrigerator dispenser.
$35.00 - $105.99
The Kenmore 9081 Refrigerator Water Filter is a replacement water filter built for select Kenmore side-by-side, bottom-freezer, and top-freezer refrigerators using the 9081 filter code. NSF 42, 53, and 401 certified to reduce lead, heavy metals, chlorine taste and odor, volatile organic compounds, and select pesticides, it delivers clean, fresh-tasting water and ice for up to 6 months or 200 gallons. Check the part number on the existing filter before ordering to confirm the 9081 is the correct replacement for the specific unit. Specification Material: Activated carbon block Product Dimensions: 7.25 x 1.875 x 1.875 inches Filter Life: Up to 6 months Filter Capacity: Up to 200 gallons External Testing Certification: NSF/ANSI 42, 53, and 401 Contaminants Reduced: Lead and heavy metals, chlorine taste and odor, VOCs, asbestos, select pesticides, sediment and particulates Brand: Kenmore Part Number: 9081 Also Known As: 46-9081, 469081, 9930, 9900, 9981 Equivalent Part Numbers: EDR1RXD1, EDR1RXD1B, W10295370A, W10295370, W10291030, W10394044, W10569758, W10735398, P4RFWB, P8RFWB2L, P8RFKB2L, FILTER 1, AP5982535, EAP11701542, PS11701542 Color: White with purple label accents Flow Rate: 0.5 GPM Operating Temperature: 34 to 100 degrees Fahrenheit Working Pressure: 30 to 125 PSI Installation Type: Push-in, eject-and-slide, tool-free Flush Requirement: 4 gallons before first use Batteries Required: No Key Features NSF 42, 53, and 401 Certified: Independently tested to reduce lead, VOCs, chlorine taste and odor, and select pesticides -- covering aesthetic, health, and emerging contaminant categories. Push-In Eject-and-Slide Installation: Open the filter cover, slide the old filter straight out, insert the new filter with the alignment arrow pointing up, and close the cover. No tools required. White with Purple Label Design: The distinctive purple label accents make the 9081 easy to identify at replacement time and confirm correct filter orientation during installation. 4 Gallon Flush Requirement: After installation, flush 4 gallons through the dispenser before drinking to clear air pockets and carbon fines from the new filter. NSF 401 Coverage: Reduces select pesticides and emerging compounds not covered by NSF 42 and 53 alone -- broader contaminant coverage than most standard refrigerator filter codes. Replace the Kenmore 9081 refrigerator water filter every 6 months or 200 gallons for consistently clean, fresh-tasting water and ice from your refrigerator dispenser.
$18.50 - $45.00
The Kenmore 53296 EF-9 HEPA Replacement Filter is an exhaust air filter designed for select Kenmore and Kenmore Elite bagged upright and canister vacuum cleaners that use the EF-9 filter type. Capturing 99.97% of dust particles, pet dander, pollen, and bacteria down to 0.3 microns, it filters the exhaust air released back into the room during vacuuming. Approved for certified asthma and allergy friendly vacuums, the 53296 is a Kenmore-approved replacement that also fits compatible Panasonic canister models. Check the vacuum manual and machine before ordering to confirm the EF-9 is the correct filter type for the specific model. Specification Material: HEPA media cloth Product Dimensions: 6.6 x 4.3 x 1.2 inches Item Weight: 3.6 ounces External Testing Certification: HEPA certified, asthma and allergy friendly approved Filtration Efficiency: 99.97% of particles 0.3 microns and larger Brand: Kenmore Part Number: 53296 Also Known As: EF-9, EF9, 20-53296, 40195, 20-40195 Equivalent Part Numbers: KC38KDWCZV07, AC38KDWCZV07, AC38KDWCZ07 Color: White Filter Type: Post-motor exhaust HEPA media filter Replacement Interval: Every 3 to 6 months depending on use Compatible Vacuum Types: Bagged upright and canister vacuums Batteries Required: No Key Features HEPA Certified Filtration: Captures 99.97% of dust, pet dander, pollen, and bacteria down to 0.3 microns - the standard set by the U.S. Department of Energy for HEPA classification. Asthma and Allergy Friendly Approved: Certified for use in asthma and allergy friendly vacuums, making it a practical choice for households with allergy or respiratory sensitivities. Post-Motor Exhaust Filter: Filters the air traveling between the vacuum and the room, trapping allergens inside the machine before exhaust air re-enters the home environment. Panasonic Cross-Compatibility: Fits select Panasonic canister vacuum models MC-CL933, MC-CL935, MC-CL943, and MC-CL945 in addition to compatible Kenmore upright and canister models. 3 to 6 Month Replacement Interval: Replace every 3 to 6 months depending on usage frequency and household dust levels. Homes with pets or heavy foot traffic may require replacement closer to the 3 month mark. Simple Drop-In Replacement: Remove the old filter and insert the new one. No tools, no assembly, no downtime. Replace the Kenmore 53296 EF-9 HEPA filter every 3 to 6 months to maintain peak filtration performance and keep allergens trapped inside the vacuum where they belong.
$19.00
The Kenmore 53295 EF-1 HEPA Media Vacuum Exhaust Air Filter is a post-motor exhaust filter designed for select Kenmore upright and canister vacuum cleaners using the EF-1 filter type, including models 30412, 30512, 30612, 22412, 22822, and 25512. Capturing 99.97% of dust particles, pollen, pet dander, bacteria, and allergens down to 0.3 microns, the 53295 filters exhaust air released back into the room during vacuuming rather than recirculating it. Approved for certified asthma and allergy friendly vacuums, it also fits compatible Panasonic vacuum models using the MC-V199H filter code. Check the vacuum manual and existing filter before ordering to confirm the EF-1 is the correct filter type for the specific model. Specification Material: HEPA media paper-based construction Filter Life: Replace every 3 to 6 months depending on use External Testing Certification: HEPA certified, asthma and allergy friendly approved Filtration Efficiency: 99.97% of particles 0.3 microns and larger Brand: Kenmore Part Number: 53295 Also Known As: EF-1, EF1, 86889, 20-86889, 40324 Equivalent Part Numbers: MC-V199H (Panasonic) Color: White Filter Type: Post-motor exhaust HEPA media filter Warranty: 1 year Compatible Upright Models: 30412, 30512, 30612, 30712, 30912 Compatible Canister Models: 22412, 22822, 22823, 25512, 25513 Compatible Vacuum Types: Bagged upright and canister vacuums Batteries Required: No Key Features HEPA Certified Filtration: Captures 99.97% of dust, pet dander, pollen, and bacteria down to 0.3 microns - trapping allergens inside the vacuum rather than releasing them back into the room through the exhaust. Asthma and Allergy Friendly Approved: Certified for asthma and allergy friendly Kenmore upright and canister vacuums, practical for households with pets, carpets, or respiratory sensitivities. Panasonic MC-V199H Cross-Compatibility: Fits compatible Panasonic vacuum models using the MC-V199H filter code, in addition to Kenmore models 30412, 30512, 22412, 22822, and other EF-1 compatible units. Not Washable: HEPA media paper construction is not designed to be washed or rinsed. Washing damages the filter media and reduces filtration efficiency. Replace the 53295 with a new filter when the 3 to 6 month replacement interval is due. Supports Suction Performance: A clean EF-1 filter maintains airflow through the vacuum exhaust. An overdue 86889 or 53295 filter restricts exhaust airflow and may reduce suction noticeably over time. Simple Drop-In Replacement: Remove the old EF-1 filter and insert the new 53295. No tools, no assembly required. Verify the model number and existing filter type before installation to ensure correct fit. Replace the Kenmore 53295 EF-1 HEPA filter every 3 to 6 months to maintain peak post-motor exhaust filtration and consistent vacuum suction in Kenmore upright and canister models using the EF-1 filter type.
$20.00$12.50
The Kenmore 53294 Style O HEPA Cloth Vacuum Bags are HEPA-level cloth replacement bags designed for select Kenmore and Kenmore Elite bagged upright vacuum cleaners using the Type O bag style, including models 31140, 31150, 50688, 50690, 5068, 5069, BU1005, and BU1018. Made from a 5-layer non-woven cloth construction rather than standard paper, the 53294 bags capture 99.97% of dust, pollen, pet dander, and bacteria down to 0.3 microns while maintaining steady airflow and suction throughout the bag's life. Cross-compatible with Panasonic U-2, U-10, and U-20E upright models, Sanyo Type PU-1, and Miele S170-S180, S183, and S184 vacuums. One important note before ordering: Type O bags and Type Q/C bags are not the same and are not interchangeable. Confirm the vacuum uses Type O or check part number 20-53294 on the existing bag before purchasing. Specification Material: 5-layer non-woven HEPA-level cloth construction Bag Dimensions: 17.0 x 7.9 x 2.4 inches Filtration Efficiency: 99.97% of particles 0.3 microns and larger External Testing Certification: HEPA level, asthma and allergy friendly approved Brand: Kenmore Part Number: 53294 Also Known As: Style O, Type O, 20-53294, 53293, 50690, 50688, 5068, 5069, 63294 Replaces Part Numbers: 20-53294, 20-50690, 20-50510, 50009, 50010, 50105, 54001, 54322 Color: White Bag Type: Cloth HEPA-level upright vacuum bag Replacement Interval: Every 3 months or sooner depending on use Compatible Upright Models: 31140, 31150, 50688, 50690, 5068, BU1005, BU1018, 32380, 3240, 3250, 3260, 3255, 3364, 3523, 37100, 3711, 37115 Compatible Cross-Brand Models: Panasonic U-2, U-10, U-20E; Sanyo Type PU-1; Miele S170-S180, S183, S184 Package Contents: 6 replacement Type O HEPA cloth vacuum bags Batteries Required: No Key Features 5-Layer HEPA-Level Cloth Filtration: Uses 5 layers of non-woven material including superfine melt-blown fiber, capturing 99.97% of dust, pollen, pet dander, and bacteria down to 0.3 microns -- a step up from standard paper bags. Asthma and Allergy Friendly Approved: Certified for asthma and allergy friendly Kenmore upright vacuums, practical for households with pets, carpets, or allergy-sensitive family members. Type O Not Interchangeable with Type Q/C: The 53294 Style O and Type Q/C bags use different neckline dimensions. Ordering the wrong type results in a bag that does not seat correctly in the vacuum housing. Neckline Sealing System: Prevents dust escape during bag changes, allowing mess-free removal without releasing trapped debris back into the air. Panasonic, Sanyo, and Miele Cross-Compatibility: Fits Panasonic U-2, U-10, and U-20E models, Sanyo Type PU-1, and Miele S170-S180, S183, and S184 vacuums in addition to Kenmore models 31140, 31150, and BU1018. 3 Month Replacement Interval: Replace the 20-53294 bags every 3 months or sooner for households with pets or high foot traffic to maintain consistent suction and filtration performance. Replace the Kenmore 53294 Style O HEPA cloth vacuum bags every 3 months in Kenmore Elite 31140, 31150, BU1005, and BU1018 upright vacuums and compatible Panasonic U-2, U-10, and U-20E models to maintain consistent HEPA-level filtration and strong suction performance.
$15.99 - $29.99
The Kenmore Elite 9918 Refrigerator Air Filter is a carbon-based replacement air filter for select Kenmore Elite refrigerators using the 46-9918 filter code, including models 7204x, 7205x, 7206x, 7209x, 7218x, 72193, 72353, and 7237x. Using a triple-action formula of baking soda, activated carbon, and zeolites, the 469918 filter reduces odors from onions, garlic, fish, stale milk, and overripe produce 15 times more effective at odor reduction than baking soda alone. Cross-compatible with LG refrigerators using the LT120F air filter code and part numbers ADQ73214402, ADQ73214404, and ADQ73334008. Replace every 6 months to maintain consistent odor control inside the refrigerator compartment. Specification Material: Activated carbon, baking soda, and zeolite formula Dimensions: 3.1875 inches H x 3.1875 inches W x 0.1875 inches D Brand: Kenmore Elite Part Number: 9918 Also Known As: 46-9918, 469918, 04609918000, 0460991800 Equivalent Part Numbers: ADQ73214402, ADQ73214403, ADQ73214404, ADQ73334008, LT120F Compatible Kenmore Elite Models: 7204x, 7205x, 7206x, 7209x, 7218x, 72193, 72353, 7237x Cross-Compatible With: LG refrigerators using LT120F air filter code Filter Type: Passive carbon-based odor reduction air filter Replacement Interval: Every 6 months Installation Type: Snap-in, tool-free Batteries Required: No Key Features Triple-Action Odor Reduction Formula: The 9918 uses baking soda, activated carbon, and zeolites together -- 15 times more effective at reducing food odors than baking soda alone. Targets Common Refrigerator Odors: Reduces odors from onions, garlic, fish, stale milk, and overripe fruits and vegetables that build up inside the compartment over time. LG LT120F Cross-Compatibility: The 46-9918 is cross-compatible with LG refrigerators using the LT120F air filter code and equivalent part numbers ADQ73214402, ADQ73214404, and ADQ73334008. Compact Snap-In Design: At 3.1875 x 3.1875 inches, the 469918 fits the dedicated air filter slot and snaps into place without tools in under a minute. 6 Month Replacement Cycle: Replace the 04609918000 filter every 6 months to maintain active odor absorption. An overdue filter stops trapping odors and may hold previously absorbed compounds inside the media. Passive Filtration System: The 9918 works without electricity, filtering air as it naturally circulates through the refrigerator compartment -- no power connection or reset required after installation. Replace the Kenmore Elite 9918 air filter every 6 months in compatible Kenmore Elite 7204x, 7205x, 7209x, and 7218x series refrigerators and LG models using the LT120F filter code for consistent odor control and fresh-tasting food storage.
$9.99 - $29.99
The Kenmore 9085 Refrigerator Water Filter is a replacement water filter for select Kenmore and Kenmore Elite side-by-side refrigerators using the 46-9085 or 469085 filter code. NSF 42, 53, and 401 certified to reduce lead, heavy metals, chlorine taste and odor, VOCs, asbestos, and select pesticides, the 9085 delivers clean, fresh-tasting water and ice for up to 6 months or 200 gallons. Check the part number on the existing filter or the refrigerator model number before ordering to confirm the 46-9085 is the correct replacement for the specific unit. Specification Material: Activated carbon block Filter Life: Up to 6 months Filter Capacity: Up to 200 gallons External Testing Certification: NSF/ANSI 42, 53, and 401 Contaminants Reduced: Lead and heavy metals, chlorine taste and odor, VOCs, asbestos, select pesticides Brand: Kenmore Part Number: 9085 Also Known As: 46-9085, 469085, CECOMINOD046967 Previous Part Numbers Replaced: 9902, 9908, 2203221, 2203980, 2255520, 4392922, 8212491 Also Replaces: EDR5RXD1, W10186668, W10186668A, W10575214, 4396508, 4396508P, 4396510, 4396510P, 4392857, 4392857R Color: White Flow Rate: 0.5 GPM Operating Temperature: 33 to 100 degrees Fahrenheit Working Pressure: 30 to 120 PSI Installation Type: Twist-and-lock, tool-free Flush Requirement: 3 quarts before first use Key Features NSF 42, 53, and 401 Certified: Independently tested to reduce lead, VOCs, chlorine taste and odor, asbestos, and select pesticides covering aesthetic, health, and emerging contaminant categories in a single 469085 cartridge. Replaces Multiple Older Kenmore Codes: The 9085 directly replaces 9902, 9908, 2203221, 2203980, 2255520, 4392922, and 8212491, consolidating several older filter codes into one current replacement across compatible Kenmore side-by-side models. Twist-and-Lock Tool-Free Installation: Twist the old filter counterclockwise to remove, insert the 9085, and twist clockwise to lock. Flush 3 quarts through the dispenser before drinking to clear air and carbon fines from the new cartridge. 6 Month or 200 Gallon Service Life: Replace the CECOMINOD046967 filter every 6 months or when water flow slows noticeably, whichever comes first. An overdue filter stops reducing contaminants effectively and may restrict dispenser flow. Maintains Beneficial Minerals: The activated carbon block filtration in the 469085 targets harmful contaminants while retaining beneficial minerals naturally present in the water supply. Replace the Kenmore 9085 refrigerator water filter every 6 months or 200 gallons in compatible Kenmore and Kenmore Elite side-by-side refrigerators and cross-compatible KitchenAid, Thermador, and Roper models using the EDR5RXD1 or 4396508 filter code for consistent NSF 42, 53, and 401 certified filtration performance.
$24.99 - $74.99
The Kenmore 53292 HEPA Cloth Vacuum Bags are Type Q replacement bags built for Kenmore canister vacuums, also compatible with vacuums that call for Type C bags. Made from multi-layer cloth media, each bag is rated to capture 99.97% of dust and particles as small as 0.3 microns, helping keep allergens and fine debris out of the air during cleaning. Each bag holds up to 2.1 liters of debris, reducing how often bags need to be changed during regular use. This pack includes 6 bags. Confirm your canister vacuum uses a Type Q or Type C bag style before ordering, since Type O bags are not interchangeable with this style. Specification Material: Multi-layer cloth, HEPA-rated media Bag Style: Type Q (also fits vacuums requiring Type C bags) Bag Capacity: Up to 2.1 liters per bag Filtration Efficiency: Captures up to 99.97% of particles down to 0.3 microns Pack Quantity: 6 bags Vacuum Type: Canister Brand: Kenmore Part Number: 53292 Related Part Numbers: 5055, 50557, 50558, 53291, 53290, 50104 Batteries Required: No Key Features Broad Canister Compatibility: Fits a wide range of Kenmore canister models including the 200, 400, 600, 700, and 800 series, along with Kenmore Elite, Progressive, Intuition, Whispertone, and PowerMate lines. Always check that the vacuum takes a Type Q or Type C bag, since Type O models use a different bag style entirely. HEPA-Level Filtration: Built with HEPA-rated cloth media that traps fine dust, pollen, and bacteria as small as 0.3 microns. This makes the bags a strong fit for households managing allergies or asthma sensitivity. Cloth Construction: Unlike standard paper bags, the multi-layer cloth design resists tearing during installation and removal and holds up better under heavier debris loads. 2.1 Liter Capacity: Each bag holds a larger volume of debris than many standard canister bags, which means fewer mid-cleaning bag changes. Replacement frequency still depends on household dust levels and how often the vacuum is used, typically every one to three months. Six Bags Per Pack: A full 6-pack supply keeps a backup on hand and avoids the need for frequent reorders on a part that gets used up regularly. Simple Drop-In Installation: Bags lock into the canister bag holder without tools, so replacement takes only a few seconds. Replace your Kenmore 53292 HEPA cloth vacuum bags for stronger suction, cleaner air, and full canister capacity in your Kenmore vacuum.
$15.00 - $39.99
Genuine Original Equipment Manufacturer (OEM) parts! Kenmore water filter (part number 9915) has NSF 42 and 53 certifications. It reduces chlorine taste and odor, cysts and lead. Water filter 9915 fits select Kenmore top-freezer refrigerators. Replace every 6 months, or more often if water flow slows noticeably. Follow package instructions when you install this genuine Kenmore water filter. Water filter 9915 replaces earlier filter part number 2301706.
$40.99 - $110.00
The Kenmore 9890 Refrigerator Water Filter Replacement is designed to deliver fresh, clean, and crisp water by effectively reducing chlorine taste and odor. This NSF 42-certified filter is compatible with select Kenmore side-by-side refrigerators, ensuring high-quality water for your daily needs. Replacing your filter every 6 months helps maintain optimal water flow and performance, promoting better-tasting water and ice. Fits select Kenmore refrigerator models with compatible part numbers. Certified by NSF 42 to reduce chlorine and improve water quality. Easy installation and consistent performance. Specification Item Dimensions (LxWxH): 3.2 x 3.2 x 5.5 inches Duration: 6 months per filter External Testing Certification: NSF 42 Brand: Kenmore Model Number: 46-9890 Special Features Superior Filtration: Effectively reduces chlorine taste and odor, improving the taste and quality of your drinking water. Reliable Performance: Consistent water flow and filtration for up to 6 months, depending on water usage and quality. Quick Installation: Designed for an easy and secure fit with compatible Kenmore refrigerators. Compatible & Part Numbers This filter is compatible with the following part numbers: Equivalent Kenmore Models: 46-9890, 469890, 04609890000P Alternate Part Numbers: ADQ72910902, ADQ72910907, GEN11042FR-08
$25.99 - $74.00
The Kenmore Style 53291 Q/C HEPA Vacuum Bags 2 Pcs are specially designed for Kenmore canister vacuums to help keep your home cleaner and your air fresher. These HEPA-grade vacuum bags capture up to 99.97% of particles, including dust, pollen, and other allergens, making them ideal for households with allergies and asthma sufferers. Each pack includes six high-quality bags compatible with various Kenmore and Panasonic canister vacuums. Durable and efficient, these bags offer reliable performance to ensure optimal suction and a cleaner living environment. Specifications Type: HEPA filtration, Style Q/C bags Particle Capture: Up to 99.97% of particles Compatibility: Fits a range of Kenmore Canisters and select Panasonic models Durability: Designed to hold more dirt and debris, ensuring longer use per bag IDEAL For These vacuum bags are a perfect solution for homes with asthma and allergy sufferers or those with respiratory sensitivities. With their HEPA filtration, they capture microscopic allergens, helping to reduce symptoms by providing cleaner air during and after vacuuming. Fit & Part Number Compatible Kenmore Models: Fits Kenmore Canisters made in the last 20 years, including Whispertone, Intuition, Elite, and Progressive series. Specific models include 23040, 23243, 23350, 24320, 24321, 24325, 24326, 24327, 24350, 24390, 24410, 24971, 24975, 24981, 24991, 25430, 2621, 26312, 26320, 26325, 26355, 26390, 26395, 26410, 26413, 26430, 26435, 26450, 26455, 27514, 27515, 27614, 27615, 27814, 27815, 27914, 27915, 28014, and 28015. Compatible Panasonic Models: Also fits Panasonic canister models MC-CG902, MC-CG973, MC-V9600, MC-CG800, and MC-885 series with MC-150M or AMC-J3EP bags. Replacement Part Numbers: Compatible with Kenmore part numbers 5055, 50557, 50558, 20-50104, 50104, 54321, 20-54321, 53292, 631396, 20-53291, 53291, 20-53290, 53290, and KM48751-12.
$15.00 - $75.00
If you own a Kenmore refrigerator, you know how important it is to keep your food fresh and your water clean. One of the most crucial components in your fridge is the water filter. Kenmore refrigerator water filters are designed to remove impurities and provide fresh water for drinking, cooking, and making ice.
In this article, we will guide you through everything you need to know about Kenmore refrigerator water filters. We have you covered, from the different types of filters to how to replace them. By this, you can make your choice to purchase the right one.
At PrecipFilter, we understand the importance of clean and safe drinking water for you and your family. Therefore, we recommend the Kenmore Refrigerator Water Filter for your household needs. Here are some of its key features:
The Kenmore Water Filter utilizes advanced filtration technology to remove impurities such as lead, chlorine, mercury, and other harmful contaminants. In addition, the filter uses activated carbon block technology, effectively reducing waterborne pollutants and ensuring clean, fresh-tasting water.
The Kenmore Water Filter is compatible with many Kenmore refrigerator models, making it a versatile option for many households. It is important to ensure optimal performance to select the correct filter model for your refrigerator.
The Kenmore Water Filter has a capacity of up to 300 gallons or six months, whichever comes first. This ensures you have a constant supply of clean drinking water without frequently replacing the filter. However, it is essential to note that the filter's lifespan may vary depending on the quality of your water supply and usage patterns.
The Kenmore Water Filter is NSF certified to remove up to 99% of lead, chlorine, and other contaminants from your water supply. It has also been tested and certified to meet or exceed industry standards for quality and performance. This ensures you can trust the filter to provide clean and safe drinking water for you and your family.
Using a Kenmore refrigerator water filter is essential for maintaining the quality of your water. These filters remove impurities such as chlorine, lead, and sediment, which can affect the taste and odor of your water. Additionally, a water filter can help protect your health by removing harmful contaminants from your drinking water.
Different types of Kenmore water filters are available, depending on your fridge's model. Some of the most common types include:
Replacing your kenmore elite refrigerator water filter is a simple process that can be done in just a few steps:
Replacing your Kenmore refrigerator water filter every six months or when the "replace filter" light turns on is recommended. However, this can vary depending on how often you use your fridge and the quality of your water supply. If you notice a change in the taste or odor of your water, it may be time to replace the filter.
Using a Kenmore water filter has several benefits, including:
As an expert in water filtration, we understand the importance of maintaining your Kenmore Water Filter. Regular maintenance ensures that your water filter is functioning optimally, providing you with clean and safe drinking water. In this guide, we will outline the necessary maintenance steps for your Kenmore Refrigerator Water Filter.
To ensure that your Kenmore Refrigerator Water Filter is functioning at its best, it's important to replace the filter regularly. The recommended replacement schedule for the Kenmore Refrigerator Water Filter is every six months. However, this may vary depending on your water usage and the quality of your water.
To determine if it's time to replace your filter, check the indicator light on your refrigerator. If the light is on or turns red, it's time to replace the filter. Additionally, if you notice a decrease in water flow or a change in the taste or odor of your water, it may also be time to replace the filter.
If you encounter any issues with your Kenmore Refrigerator Water Filter, here are some troubleshooting tips:
Water flow issues: If you notice a decrease in water flow, check for any kinks in the water line or clogged filters. Additionally, ensure that the water supply is turned on.
Odor or taste issues: If you notice a change in the taste or odor of your water, it may be due to a clogged or expired filter. Replace the filter and flush the system.
Leaks: If you notice any leaks, ensure that the filter is properly installed and tightened. Additionally, check the water line for any damage or leaks.
It is recommended to use only Kenmore water filters in your Kenmore refrigerator. Using non-Kenmore filters may not fit properly and can affect the quality of your water.
You should replace your Kenmore refrigerator water filter every six months or when the "replace filter" light turns on. However, if you notice a change in the taste or odor of your water, it may be time to replace the filter.
To install a Kenmore refrigerator water filter, locate the water filter compartment in your fridge, turn off the water supply to the fridge, remove the old filter by turning it counterclockwise, insert the new filter by turning it clockwise, turn on the water supply, and flush the filter for several minutes.
If your kenmore elite refrigerator water filter is not working properly, check to make sure it is installed correctly and replace it if necessary. You can also contact Kenmore customer service for assistance.